Radio-wave Touch Probe RWP20.41


The touch probe RWP20.41 has been designed for complex measuring tasks. Modular extensions enable measuring inside the workpiece or in deep cavities. The freely adjustable trigger force allows both triggering on very thin-walled workpieces at minimum trigger force and the use of heavy cross probes at maximum force....

View More..

Radio-wave Touch Probe RWP38.41


The compact radio-wave touch probe RWP38.41 has been developed for machines requiring signal transmission across greater distances where infrared transmission is not sufficient. It is ideally suited for use on machine tools with limited maximum tool diameter and restricted height of the Z axis, particularly with 5-axis heads. It can be extended in a modular way and is the perfect solution for complex measurements. Thanks bi-directional...

View More..

Temperature Probe RWTP20.44


The temperature probe RWTP20.44 is intended for use on large machining centres and 5-axis machines when infrared transmission is not sufficient. It acquires, fully automatically, the part temperature before and during the machining (patented). This enables improved control of the production process and tuning of machining parameters during ongoing production. Temperature-dependent parameters can thus be determined with certainty before the part...

View More..

Radio-wave Tool Setter RWT35.50


The Radio-wave Tool Setter RWT35.50 for vertical lathes, large milling machines and machining centers enables variable positioning of the tool setter, to fit the task at hand. Through use of a magnetic mount, the tool setter can be placed in wide range of table positions. Our patent pending system delivers highly accurate and repeatable re-positioning of the tool setter. With wireless operation and no permanently fixed hardware, use of the...

View More..

Radio-wave Receiver RWR95.40


The compact radio-wave receiver RWR95.40 communicates with all m&h radio-wave probes, including the temperature probe. It is sealed to IP68 and can be mounted anywhere in the machining area with ease. Measurement and temperature data are transmitted using the high-penetration transmitting frequency of 433 MHz. While in operation, the environment is continuously checked for interference from transmitters (SCS). Corrupted channels are blocked,...

View More..


Top