Tool Setter TS35.10

LTS35.60 – the premium Laser Tool Setter

Tool Setter TS35.10 establishes tool geometries on the machine. With its precise measuring mechanism, it reliably determines length and radius of the tool, measures single edged cutters and detects broken tools. Measuring can be made both statically and dynamically. It has been designed for use on milling machines and machining centres.

  • Description
  • Features & Benefits
  • Technical Data
  • Applications
  • Downloads

Constant production quality requires the use of reliable accurate tooling. One vital requirement is precise tool data. m&h Tool Setter for tool measurement detect tool length and tool radius directly on the machine. The data is automatically transferred to the tool table of the control. Periodic tool checks for broken tools or wear create additional production safety. The Tool Setter from m&h will do this job, saving time and increasing reliability.


Modular construction

  • Variable height 105 – 305 mm
  • Large measuring plate Ø37 mm
  • For use on milling machines and machining centres

Precise measuring results

  • Highest accuracy through precision measuring mechanism
  • Adjustable trigger force allows measuring of sensitive tools
  • Stable zero position allows precision measuring using only one measuring touch
    Sturdy and protected
  • Probe housing made of stainless steel
  • Water-proof probe sealing using IP68 standard
  • High protection of measuring mechanism with protection bonnet plus double, chemical resistant sealing membranes as standard
  • Connecting cable protected by PUR shrink sleeve
  • Trigger force can be increased to prevent false triggering caused by vibration (patented)
  • Radial protection of the measuring mechanism by break shaft

Operation suitable for the workshop

  • Measuring surface already aligned upon delivery
  • Tool setter detachable from machine table, no need for new alignment
  • Easy alignment if required, by means of 4 adjusting screws
  • Interface integrated into the touch probe, no need for additional space inside the electrical cabinet
  • With cable connection or plug-in
  • Optical status display
Unidirectional repeatability 2 Sigma 1 μm
Sensing directions Radial, axial
Max. stylus deflection Radial ±12.5°, axial -6 mm
Trigger force Radial 0.3 - 1.4 N, axial 2.5 - 12.5 N, adjustable
Extensions tool setter 30 mm, 50 mm, 100 mm, 200 mm
Power supply 12 – 32 VDC, max. 25 mA
Protection class IP68: EN60529, plugged
Weight 500 g
Temperature range 10 °C – 50 °C
Material Stainless steel
Mounting Vertical and horizontal possible
Interface electronics Integrated
Output signal Switching signal via Solid State Relay

Case Study miTec - Limbach Oberfrohna 2013-09-02 762 KB (PDF)


m&h Tool Setters Brochure 2013-09-05 2 MB (PDF)